A3F Stock End (Magpul & SB Tactical)
Replacement A3F Style Stock End for Magpul SL Stock & MP BSL Arm Brace. In order to use this stock end you must remove either the brace end, or the T15 bolt from the Magpul stock end, take off the stock, and insert the new stock end.
A3F Stock End for SB Tactical HKPDW Pistol Brace. In order to use this brace to stock conversion piece you must basically destroy any use the device has as a pistol brace. I would suggest a dremel or coping saw to cut off the plastic in the rear underneath the rubber. I used a dremel and sanded it down with an orbital sander to save time. Design is slightly larger than the real A3F stock end and is based of the MKE factory blueprints, but enlarged to fit the dual cylinders. Design allows for friction fit, so be sure to sand down the plastic cylinders SMALLER than the metal portion so you don’t end up cracking your stock end like I did with mine.
Please allow two weeks for fulfillment from the time you order. It takes time to dry, print, and anneal products. For inquiries or any issues at all with the product, please reach out to me at BrownsBrush@Outlook.com
Replacement A3F Style Stock End for Magpul SL Stock & MP BSL Arm Brace. In order to use this stock end you must remove either the brace end, or the T15 bolt from the Magpul stock end, take off the stock, and insert the new stock end.
A3F Stock End for SB Tactical HKPDW Pistol Brace. In order to use this brace to stock conversion piece you must basically destroy any use the device has as a pistol brace. I would suggest a dremel or coping saw to cut off the plastic in the rear underneath the rubber. I used a dremel and sanded it down with an orbital sander to save time. Design is slightly larger than the real A3F stock end and is based of the MKE factory blueprints, but enlarged to fit the dual cylinders. Design allows for friction fit, so be sure to sand down the plastic cylinders SMALLER than the metal portion so you don’t end up cracking your stock end like I did with mine.
Please allow two weeks for fulfillment from the time you order. It takes time to dry, print, and anneal products. For inquiries or any issues at all with the product, please reach out to me at BrownsBrush@Outlook.com
Replacement A3F Style Stock End for Magpul SL Stock & MP BSL Arm Brace. In order to use this stock end you must remove either the brace end, or the T15 bolt from the Magpul stock end, take off the stock, and insert the new stock end.
A3F Stock End for SB Tactical HKPDW Pistol Brace. In order to use this brace to stock conversion piece you must basically destroy any use the device has as a pistol brace. I would suggest a dremel or coping saw to cut off the plastic in the rear underneath the rubber. I used a dremel and sanded it down with an orbital sander to save time. Design is slightly larger than the real A3F stock end and is based of the MKE factory blueprints, but enlarged to fit the dual cylinders. Design allows for friction fit, so be sure to sand down the plastic cylinders SMALLER than the metal portion so you don’t end up cracking your stock end like I did with mine.
Please allow two weeks for fulfillment from the time you order. It takes time to dry, print, and anneal products. For inquiries or any issues at all with the product, please reach out to me at BrownsBrush@Outlook.com
Fits suppressors up to 49mm in diameter. For use with real suppressors, email me at BrownsBrush@outlook.com if you need an extended forend to conceal your mounting system. Check the page for an updated fitting document which I will update with orders and feedback from users. KAK Industries Extended 1/2-28 Flash Can 5in is featured next to my faux suppressor for a visual reference with thread mounts. Fits the MP5/AP5 full size models.